371 Network Player Setup Guide: Stream Like a Pro

By Canadian High-End Audio Manufacturer | MOON by Simaudio | Published: 2026-10-25

Category: How-to Guides

Learn how to set up the MOON 371 network player amplifier for seamless streaming. Follow these step-by-step instructions to get the best sound from your Compass Collection system.

Quick answer

Setting up the MOON 371 network player amplifier is straightforward: connect your speakers and network, power on, configure streaming services via the MOON app, and optimize placement for best sound.

Why placement matters for the 371

The MOON 371 combines amplification, DAC, and network streaming in a single chassis. Because it generates some heat during operation, ensure at least 4 inches of clearance above and behind the unit for ventilation. Avoid placing it directly on top of other hot components or inside an enclosed cabinet without airflow.

For best network performance, keep the 371 within 10 feet of your router if using Ethernet, or ensure a strong Wi-Fi signal if going wireless. A wired connection is generally more stable for high-resolution streaming.

Choosing the right audio connection

The 371 offers both balanced (XLR) and unbalanced (RCA) inputs. For most setups, use balanced connections to your speakers or preamplifier for lower noise and better signal integrity. If your speakers only accept RCA, the unbalanced outputs still deliver excellent sound quality.

If you plan to use the built-in phono stage for a turntable, connect your turntable's RCA cables to the phono input on the 371. Ensure your turntable has a moving magnet (MM) cartridge, as the phono stage is optimized for MM cartridges.

Step-by-step setup guide

Unbox and position: Place the 371 on a stable, level surface with adequate ventilation. Remove all packaging materials and check that the power cord, remote, and any included cables are present. Don't block the ventilation slots; overheating can reduce performance.
Connect speakers: Using high-quality speaker cables, connect the left and right speaker terminals on the 371 to your speakers. Ensure the polarity (+/-) matches on both ends. Loose or reversed connections can cause poor sound or damage.
Connect to your network: Plug an Ethernet cable from your router into the LAN port on the 371, or use the built-in Wi-Fi. For Wi-Fi, you'll need to enter your network credentials via the MOON app. A wired connection is more reliable for high-resolution streaming; Wi-Fi may drop out in congested areas.
Power on and configure: Connect the power cord to the 371 and a wall outlet. Press the power button on the front panel. Download the MOON app on your smartphone or tablet, then follow the in-app instructions to set up streaming services (Tidal, Qobuz, etc.) and network settings. The app is essential for initial configuration; don't skip it.
Select input and adjust volume: Use the front panel knob, remote, or app to select the desired input (Network, USB, Phono, etc.). Gradually increase the volume to a comfortable listening level. Start with volume low to avoid sudden loud bursts.
Optimize streaming quality: In the MOON app, set your streaming service to the highest available quality (e.g., FLAC 24-bit/192kHz). Ensure your network can handle the bandwidth—at least 25 Mbps is recommended for high-res streaming. Lower quality settings may cause buffering or reduced audio fidelity.

Product facts

371 Lettore di rete / Amplificatore: The MOON 371 is the centerpiece of the Compass Collection, combining a network player, DAC, preamplifier, amplifier, and phono stage in one unit. This all-in-one design simplifies your setup—no need to match separate components—while delivering high-fidelity sound from streaming, digital, and analog sources.
371 Lettore di rete / Amplificatore