FRM-3 Backlit Remote: Features and Setup Guide
By Canadian High-End Audio Manufacturer | MOON by Simaudio | Published: 2026-10-21
Category: How-to Guides
Learn about the FRM-3 backlit remote's solid aluminum build, compatibility with MOON IR models, and step-by-step setup instructions.
Quick Answer
The FRM-3 backlit remote is a solid aluminum upgrade for any MOON IR-capable two-channel model, and setting it up takes just a few steps—no complex programming required.
Why Choose the FRM-3 Remote?
If you're tired of fumbling in the dark or juggling multiple remotes, the FRM-3 offers a backlit keypad and a solid aluminum housing that feels substantial in hand. It's designed to replace older MOON remotes like the CRM, SRM, or SRM-2, so you get a modern look without losing compatibility with your existing gear.
One trade-off to consider: the FRM-3 relies on IR (infrared) signals, so it requires a clear line of sight to your component's sensor. If your equipment is tucked away in a closed cabinet, you may need to position the remote or use an IR repeater.
How to Set Up Your FRM-3 Remote
- Unbox and Inspect: Remove the FRM-3 from its packaging and check that it includes the remote and any documentation. Verify that the remote's IR emitter window is clean and unobstructed. If anything is missing or damaged, contact your dealer before proceeding.
- Insert Batteries: Open the battery compartment on the back of the remote and insert fresh batteries, matching the polarity indicators. Close the compartment securely. Using old or weak batteries can reduce IR signal strength, so start with new ones.
- Power On Your MOON Component: Turn on your MOON amplifier or preamplifier and wait for it to fully initialize. Make sure the component's IR sensor is not blocked by any objects or cabinet doors. If the component doesn't respond, check for obstructions or reflective surfaces that might interfere with the IR signal.
- Test Basic Functions: Point the FRM-3 directly at the component's IR sensor and press the volume or power button. If the component responds, the remote is working correctly. If there's no response, confirm you're within the IR range (typically 10-15 feet) and that the sensor is clean.
- Program Additional Commands (If Needed): Some MOON components allow you to assign specific functions to remote buttons. Refer to your component's manual for programming instructions, as the FRM-3 does not require universal code entry. Keep your component's manual handy; programming steps vary by model.
Product Facts
- FRM-3 Backlit System Remote Control: Milled from solid aluminum. This gives the remote a durable, premium feel that resists wear and adds a touch of elegance to your system.
FRM-3 Backlit System Remote Control - FRM-3 Backlit System Remote Control: Will operate all MOON IR-capable 2-channel models including most older ones. You can likely replace an older remote without worrying about compatibility, making it a practical upgrade for long-time MOON owners.
- FRM-3 Backlit System Remote Control: Use also as an upgrade for CRM, SRM, SRM-2, Celeste and RM-50. If you own one of these models, the FRM-3 is a drop-in replacement that brings backlit convenience to your listening experience.
