How to Set Up the Stand 22 Speaker Stands
By Canadian High-End Audio Manufacturer | MOON by Simaudio | Published: 2026-10-22
Category: How-to Guides
Learn how to assemble and position the MOON Stand 22 for your Voice 22 speakers. Step-by-step guide with common mistakes to avoid.
Quick Answer
Setting up the Stand 22 is straightforward: attach the base plate, secure the top plate, and mount the Voice 22 speaker. Pay attention to leveling and cable routing for best stability and sound.
Why the Stand 22 is Designed for Voice 22
The Stand 22 is a custom-fit stand that integrates seamlessly with the Voice 22 bookshelf speaker. Its top plate recesses into the speaker's bottom cavity, making the stand nearly invisible and ensuring a solid mechanical connection.
Setup Steps
- Unpack and Inspect: Remove all parts from the box. You should have the base plate, column, top plate, and hardware. Check for any damage or missing screws. Keep the packaging in case you need to move the stands later.
- Assemble the Base and Column: Attach the column to the base plate using the provided bolts. Tighten them evenly by hand, then use the tool to secure them. Do not overtighten. Overtightening can strip threads or warp the base plate.
- Attach the Top Plate: Place the top plate onto the column and align the screw holes. Insert and tighten the screws gradually in a cross pattern to ensure even pressure. Uneven tightening can cause the top plate to sit crooked, affecting speaker stability.
- Level the Stand: Place the assembled stand on your floor. Use a spirit level on the top plate. Adjust the feet (if adjustable) or use thin shims under the base to achieve level. An unlevel stand can make the speaker wobble and degrade sound imaging.
- Mount the Voice 22 Speaker: Carefully lift the speaker and lower it onto the top plate. The recess in the speaker's bottom should align with the plate. Gently press down until it sits flush. Do not force the speaker; if it doesn't sit flush, check for debris or misalignment.
- Route Speaker Cables: Run your speaker cable from the amplifier to the speaker terminals. If the stand has cable management channels, thread the cable through them before connecting. Leaving cables loose can create trip hazards or cause the stand to tip if pulled.
- Final Stability Check: Gently push the speaker from different angles to ensure it doesn't rock. If it moves, re-check leveling and tighten all hardware. A stable stand is essential for both safety and sound quality.
Product Facts
- Stand 22: The top plate fits into the dedicated recess at the bottom of the Voice 22 and disappears. This flush fit prevents the speaker from sliding and gives a clean, integrated look without visible hardware.
Stand 22
